Joined: Sun Oct 09 2005, 05:02PM
Location: ALLEN PARK, MI.
Posts: 2007
Scott, whatever the "standard" C body size were. Nothing special! These Sway-A-Way jobs are 1.031" size. If the fools made them with the FACTORY hex offsets, I'd be home free! No such luck. It still would be cool to have a custom Coil Over front suspension. Then, with the T-bars out of the way, you could have tons of room to have a set of stainless steel custom headers made that would clear EVERYTHING! Easier to work on things around the engine as well. Tony P.
Joined: Thu Oct 13 2005, 08:23PM
Location: Beautiful Down Town Roebuck Ontario
Posts: 227
Not to hijack the thread Tony, but you might want to check out AirRide Technologies setup. I saw their stuff in action at the Nashville Goodguys show. They had a 66 Chevelle going around a slalom course like it was on rails. They also had a late 60's Bonneville doing the same. Handling plus Limo ride quality.
Joined: Sun Oct 09 2005, 05:02PM
Location: ALLEN PARK, MI.
Posts: 2007
No biggie Kevin! I hijacked Dana's thread anyway! Sorry Dana! What you say Kevin is a great idea! Only two things about it not good. First, the 66' Chevelle already has a coil front set-up, so a mod to an "air ride" is much, much easier to convert! Second...PRICE! Those air ride's are NOT CHEAP! Other than that.......SURE.....that would be a cool deal! !thumb Tony P.