I have looked through my local auto parts store for one and cannot find one,I have a 73 Fury with a 360/727 and my rad's vents are GONE from the middle on down thus causing my barge to overheat.I've heard of the Modine?rads being total garbage.and theres a Ford Explorer rad mod but i would rather have one thats for my car .does anyone have one i.e would one form a 70-72 fit?any help would be greatly appreciated.
Joined: Wed Oct 12 2005, 12:21PM
Location: Jersey, the only state that doesn't need the New...
Posts: 676
i think the radiator that was in my 74 new yorker (had a 440) is still in the car, but its in a junkyard by me and Im not sure if it would work for you...
Hollander says #1512 (22" Wide) and 1513 (26" wide) 71 to 73 Plymouth Fury 360 Motor Specific or 318 with A/C
If you have a Non-A/C Car you can use both sizes. If you have A/C, you need to use the 26"
1512 22" Chrysler 71 w/ 360 Engine 71 to 73 Polara / Monaco 71 to 73 Fury 360
1513 26" reads the same
There is a note on 1513 that says you can use a rad out of a 71 B100 Van with a 318 and 360 w/ AC, 72 to 78 B200 & B300 Vans 318 and 360. It will require an adaptor for the trans lines.
Hope that helps.
Modine is fine. . . .. But nobody makes a new one for the C Body with the LA series engine (318/360) But your Rad shop can get a core and recore your rad for around $250 and it would be new
<span class='smallblacktext'>[ Edited Wed Nov 09 2005, 09:23PM ]</span>
Mine had a/c but i removed it,As for recoring my rad. even with the vents from the middle on down on my rad being non exsistant a rad. shop can recore it?i can't wait to get a good rad. and rebuild the Holley 600 4v on it then i can drove my Fury again ,i miss driving her