Joined: Sat Mar 04 2006, 01:49AM
Location: Phoenix, AZ
Posts: 154
Here's my C, I picked her up out of a neighbors back yard for $750 no rust all hubcaps jack,spare original keys and original owners manual in the glovebox running and driving...well sort of I had to replace the batt. and cables rebuild the carb change the fluids and get new tires but it has been running good for 2 years exept a month after I got it the timing chain slipped so I replaced it witha tru-roller fk those plastic teeth timing gears.I have also replaced the fuel and water pump had the dist. rebuilt full tune up installed a drain plug in the tranny pan went through the brakes and recently repaired the heater with the docks help.
MODS:Glasspack air filter tach + gauges rebuilt heads with hardened exhaust seats and a three angle. removed the heat riser or w/e out of the exh. manifold and filled the holes (what is that thing used for anyways?).I plan on installing a floor shifter soon. What shifters work good with a bench seat car? I was thinking about using a truck shifter. It is my first Mopar and the first car project I've taken on by myself.
She's a little overweight and could use a little cosmetic surgery here and there and a makeover but I love her.
The triple gauge kit is out of the car right now because the volt gauge was defective and I haven't installed the new ones I got from Autozone damn those cheap Sunpro gauges, At least I still had the receipt.