As Mr. Rust shows, it does fit. I didn't have that much trouble. Would have been a lot easier without the windage tray. I installed the pan to check the clearance and saw it was real close to clearing the arm, but not quite. That angled side helps a lot! So I went ahead ans installed the pan and then gave it a little "love" with a ball been hammer. It didn't take much. Maybe an area 3" in diameter and 1/4" deep? Before whacking it, I could turn my wheel stop to stop, but the arm was dragging on the pan. So it didn't need much. It has been on for a year now!