Joined: Wed Dec 21 2005, 10:47AM
Location: Dallas, WI
Posts: 12
Hello all. I'm starting the trim removal on my formal roof for a vinyl top replacement. I have all of it off except for the front and rear window trim. What I need. What does the tool look like that releases the stainless from the clips, and does it go under the trim from the glass side or the body side? From what I see it looks like the tool should enter from the glass side. Does the glass need to come out? And last: Where can I find roofrail channel rubber weatherstrip for my Fury
Joined: Sat Dec 10 2005, 04:28PM
Location: United States
Posts: 4954
Burnt
Suggest you have a glass company come in and remove the windows. That's what I do, even though I know what to do and have the proper tools. It's worth the $75.00 to have them pull everything.
You will usually find there is rust at the bottoms of the rear windows on the lower corners. Be prepared for that. If you have rust there, remove the rear window. I also find that sometimes there is rust under the body caulking at the base of the windshield pillars. If there isn't any visible, there is bound to be some under the caulking. Here again, the best plan is to remove the shield.
Let the glass company take the responsibility for the pulling. You'll be glad you did. It's one of the few things I send out, even though I have the tools and ability
