I just put in LEDs with lens into my fender mounted turn signals. The originals were in poor shape. Just ttook out the internals and inserted the LED housing and wired it into the existing wire. They definately are brighter. I would post pics but I have not figured out how to do that yet. FYI I also added a set of sport seats from a .....lets say non MOPAR, they are a much more comfortable than the originals. <span class='smallblacktext'>[ Edited ]</span>
Let's say, tell us what seats they are! There are LOTS of great seats out there, and if you get them recovered, you can even match your interior pretty well.
I'd like to see the LED turn sigs, too. I need to do something with mine one of these days, to include replacing the lenses. Oy.
You can post the pics in the Gallery and then link to them. Instructions are in the FAQs.
I have been wanting to do some LED upgrades on my Mopars, so how about some more details! Where did you get them?
The seat swap is interesting also. Sport Seats? Are those buckets? Go ahead and mention what they came from. I need to swap in some low back buckets also, and the 70 Fury ones I had picked up are pretty rough, I am open to alternatives.
I picked up the LED at a swap meet. They are in a small bullet housing with a fish eye lens. I just set them inside the housing after taking out the bulb and existing lens. When I bolted them down it held them in. As for the seats they are black 1993 Mustang GT seats with power lumbar and side bolster adjustments. I had an 89 with these seats and they are comfortable for long drives. I used my original sliders which bolted up to existing holes in the seats and had to drill 2 new holes in the floor to bolt them down. As for pics I tried to do them thru the gallery but I just am too computer illiterate. I will try again or have someone post them for me.