Hi all from not so sunny england! In the proces of a ground up resto on my 66 383 polara ragtop. Just fitted new, rocker shafts and rockers to my heads. On fitting there is no clearance at all between the rockers take heavy finger pressure to move (obviously the pushrods arent in!) wheras the old rockers had about a millimetre of room per pair....were my old ones just worn and i'm worrying about nothing? the red lines show where i mean cheers ian
Joined: Wed Nov 17 2010, 03:28PM
Location: florida
Posts: 1311
that's how the shafts go together with no adjusting needed.i assume you have all the spacers on shaft.make sure the oil holes on shafts are down or you will not get proper oiling to shafts and pushrods
that's how the shafts go together with no adjusting needed.i assume you have all the spacers on shaft.make sure the oil holes on shafts are down or you will not get proper oiling to shafts and pushrods
its sideways movement were talking about.....there is none....