Joined: Fri Mar 13 2009, 11:21AM
Location: San Marcos, CA
Posts: 713
Hi all, I have some rust on my C pillar, right above the trim that separates the body from the C pillar. my car doesn't have the head liner in it yet, but I don't see the rear most mounting nut. Do I have to remove the rear glass to get to that mounting stud/nut or can it be accessed without removing the glass? Thanks
If you're talking of the piece of trim that divides the C pillar from the quarter panel (about 7 inches long with a little tab that wraps around the back end), there are only two fastener points, both accessible from the inside. Speed nuts on spikes essentially. There may be some sealer holding the piece to the body...
Both fasteners are accessible from inside without removing the rear glass, but you may have to remove the rear package tray and the side shroud fillers to do so.