Joined: Sat Aug 19 2006, 05:03PM
Location: Ontario, Canada
Posts: 2919
I would go with either of the two actual colours, not battleship grey.
No need to apologize for using a non-Mopar colour IMO. It's your car and you're obviously not concerned about keeping it stock. My 66 Windsor was just sprayed in a Cadillac colour "Autumn Maple Firemist".
Joined: Sun May 04 2014, 04:47PM
Location: Missouri
Posts: 75
So the tear down has started and this is what we found.... Yes that is expanding foam and bondo... Lets hope thats the worst of it!! Thankfully I had already bought new quarter panels for both sides!! Ill post more pictures when I can! Oh and I have decided on the lead foot gray! I think it will have the look I am wanting and wont be as hard to keep clean as black.
Joined: Sun May 04 2014, 04:47PM
Location: Missouri
Posts: 75
Hey guys, since photobucket sucks and took away all my pictures I went back through and posted all the pictures again. It took way longer than it should have but I think I put everything back in the right spot. So now you can look back and see everything again. I was also looking back and noticed I didnt post about my new seats I had put in.
When I first got the car it had some old crappy mustang seats in it. So I went cheap and ordered a set of ebay seats. DO NOT get these. They are not safe and the build quality is terrible (I know I know.. I should have known). So those came out and I found a used set of SRT seats! I love them, they are so comfortable! I do need to make some mounts that will level the seats a little since my floor pans aren't level.
Joined: Sun May 04 2014, 04:47PM
Location: Missouri
Posts: 75
Oh and I got in my entire front end rebuild kit from PST, including a rear sway bar to match the front! And I dont have a picture of them but the rear leaf springs came in as well! Should be like a whole new ride when I put it in.
Joined: Sun May 04 2014, 04:47PM
Location: Missouri
Posts: 75
Just an update, or lack there of. I am still waiting for progress on the Fury from the body shop. I will post pictures as soon as I get em.
On a side note, did you guys see that PST.com just got new 1.12 torsion bars for our C Bodys!! They are $419 for the pair. Im not sure if I should get them. What do you guys think? Is it worth it?
Joined: Thu May 01 2008, 11:15AM
Location: Chicago,IL
Posts: 2868
I'm pretty sure I have 1.12's, 10yrs old at this point. Needed much firmer KYB shocks to keep them in check, but important upgrade to help with the floaty front.
