Joined: Sat Mar 29 2008, 03:36PM
Location: North eastern Wis.
Posts: 1638
Theoretically it should work. You have to figure out if your going to get enough volume and still maintain your desired pressure. My guess is probably not for two units...
What are the needs of your turbos?
There is another boss right there that could be drilled and tapped to a larger size.
Another consideration is where are you mounting your turbos? I would want to keep the lines as short as possible.
Once the motor is up and running the oil pressure should be maintained throughout the system. Starting the motor might be where you run into low pressure problems. Drain back would be the main reason I would think.