My car haz been leaking tranz fluid for several weeks, getting progressivly worse. I figured its the shift lever input shaft seal kuz thats the usual thing.
Inexpensiv part, but its a hasl to install. You hav to drain the fluid, drop the pan and take out the valve body to get to it. Pushing out to old wun and pressing in the new wun iz eazy. Therez also an O-ring to replase, wich iz eazy. Then put everything bak together and refill the fluid. Tedius and messy, probably 2 or 3 owrz. So, kuz I wuznt going anywhere, I procrastinated.
Today, I took a look and discovered it wuz just a pan gasket problem! It had skwoze out on 1 corner due to the gasket sealer melting from being no good junk. So all I had to do wuz loosen sum skrewz and push it bak in! WOOHOO!