New to the forum and have had my fury project going for a few years and finally have been digging in hardcore (now that I have a shop) I'm getting close to getting the sub frame back under it and will be moving into the motor soon which is a 440 I am going to twin turbo with I plan on some cummins hy35 turbos. I have braced up the frame and have firm feel poly bushings control arms 1 1/4 sway bar Hd strut rods and scare bird disc brake conversion. Car was originally 318. Also have been doing some firewall modifications to hide wires and look nicer. So input advice or anything from suspension to frame or motor would appreciated.
I believe I got the 1.12's. If you are planning to lower the car I would go with the stiffer but at stock height the police might be sufficient. I noticed the front suspension isn't as stiff when you lower the car.
Been making some headway getting everything mocked up and built with the suspension upgrades and the turbos before the motor gets built and everything gets painted.