Joined: Sat Apr 23 2011, 09:26PM
Location: Pa
Posts: 24
Hi Everyone I am sure someone here has this answer but after looking at it for a good while I know. That I don't. I will be changing interior color this winter and want to do as much as I can myself. I am removing the trim pieces from around the windows and headliner. I did good until it is time to remove side trim above the windows. Car is 68 fury 2 door hardtop. I see no visible screws but behind the rubbers I do see some. I don't want to damage anything. Any help would be greatly appreciated. Thanx Frank
Joined: Mon Jan 25 2010, 02:40PM
Location: Bethel Park PA
Posts: 846
Yes there are screws behind the rubber. The roof rail rubber can be had from Steele Rubber. I replaced mine years ago. I never pulled the headliner though as mine is in great shape. Good luck.
Joined: Fri Jun 20 2008, 10:37PM
Location: Sydney Australia
Posts: 221
If you look on eBay etc you can find a re-published factory workshop manual, they are best as they show 'exploded' views off the body parts and panels and how they come apart.
Joined: Sat Apr 23 2011, 09:26PM
Location: Pa
Posts: 24
I am in the Lehighton area. Near lower Poconos. It has been almost 25 years since doing something like this. Told my better half that the worst that could happen is we send it out to get put back together