Joined: Tue Oct 23 2007, 07:15PM
Location: Strathmore, Alberta
Posts: 73
Guys I need some advice I am running ARE 16" five spokes on my 66 fury 2 looking to get a little larger steel wheels does anyone make them so i can use my stock dog dish hub caps? I live in Alberta and lets just say the pot holes can swallow your C body and spit you out the other side with bent rims (as what happened to me !stars ) so i figure the steel will have a little more resistance to that. any suggestions &|
Joined: Thu May 01 2008, 11:15AM
Location: Chicago,IL
Posts: 2868
ya, your only choice would be the later model truck dog dishes that come on 16" wheels, if you could find other wheels. The low model new chargers and 300's come with steel rims that I think adapters exist out there to bolt them up, but they are 17's I think, so no hubcap is likely to fit.
Joined: Sun Feb 26 2006, 08:46PM
Location: Kingston,Ontario
Posts: 5622
Jeep Cherokee,Grand Cherokee circa up to 2004 wheels in 16" and 17" will fit. The offset may be a little different so check clearances between the wheel and upper control arm/brakes.
Joined: Tue Oct 23 2007, 07:15PM
Location: Strathmore, Alberta
Posts: 73
sounds good, I talked to a buddy that has a tire shop in BC Canada he says for my car the only manufacturer of the offset to fit my car in 20" is ARE torque thrust 5 spokes.I have a set of the 15 " police wheels if anybody wants them and have a set of 15" stock rims for storage wheels.(news flash!!! Just talked to MY buddy Tom the tire guy and he has a set of 20" and 22" on their way to me by grayhound i will post new picks of my Fury, and they were not torque trust mags, he says they will look good, I will let the board members be the judge of that. !dance